diff --git a/WouoUI/WouoUI.ino b/WouoUI/WouoUI.ino deleted file mode 100644 index 4d3e72a..0000000 --- a/WouoUI/WouoUI.ino +++ /dev/null @@ -1,1894 +0,0 @@ -/* - 此程序用于实现 wooting 键盘中的 Rapid trigger 功能。 - - 主功能移植并优化自 Github 上的一个开源项目，添加了按键的独立参数和两端的死区，优化了初始化方式，增加控制器，模仿稚晖君 MonoUI 的超丝滑菜单。 - - 当前版本：v2.1 - - * 重构代码，只保存路径和选择框所在位置，分页面类型定义变量。 - * 增加图标和列表两种主界面风格。 - * 支持本地查看所有配置，在关于本机页面。 - * 支持128*64，128*32两种主流OLED屏幕分辨率，只需要替换驱动即可。 - * 增加列表展开动画效果。 - * 增加选择框展开和跳转动画效果。 - * 增强动画速度的可调精度。 - * 增加循环模式。 - * 增加旋钮方向反转选项。 - - 控制器实现了以下功能： - - * 丝滑菜单，模仿UltraLink的MonoUI，实现主界面动画，列表动画，聚焦动画等，可分别调节动画速度。 - * 旋钮功能，在休眠界面旋转可调节音量或亮度，点按后进入主菜单，在菜单界面旋转滚动菜单，点按选择菜单。 - * 三种模式，支持不同极性的磁轴和传感器的组合，还有禁用模式。 - * 参数设置，支持设置几乎所有参数，包括：触发值，释放值，上死区，下死区，键值，模式，初始化时放大抖动的倍数，每个按键都可以独立设置，也可以一起设置。 - * 断电保存，回到休眠模式即保存当前设置，断电后不会丢失。 - * 测试引脚，支持查看每一个引脚的电压变化情况，用于测试传感器和引脚是否正常。 - - 测试用开发板为STM32 F103C8T6，以下是使用说明： - - 硬件： - * EC11：A -> PB13 ; B -> PB12 ; S -> PB14 ; 电源3.3v - * OLED：四线，0.96 SSD1306 128*64，SDA -> PB7 ; SCL -> PB6 ; 电源3.3v - * 板子上的跳线帽设置：BOOT0 -> 1 ; BOOT1 -> 0 - * 串口模块与板子连线：GND -> GND ; 3V3 -> 3.3V ; RX -> PA9 ; TX -> PA10，其余引脚空着。 - * 串口与电脑连接，用数据线连接板子上的母口和电脑。 - * 点击IDE左上角向右箭头的按钮，等待编译和上传完成。 - * 上传完成后如要测试手感，无需断开串口模块，但需要拔插数据线，电脑才能识别到是USB设备。 - * 当BOOT在第一条所述设置时，上传完成后，第一次拔插数据线时电脑会认到USB设备，从第二次开始就认不到了。 - * 手感调试合适后修改跳线帽的设置为：BOOT0 -> 0 ; BOOT1 -> 0。设置后就能收起串口模块了。 - - 软件： - - * 文件 -> 首选项 -> 其他开发板管理器地址 -> 添加一行：http://dan.drown.org/stm32duino/package_STM32duino_index.json - * 工具 -> 开发板 -> 开发板管理器 -> 搜索stm32F1，下载STM32F1xx开头的库 - * 工具 -> 开发板 -> stm32F1... -> Generic STM32F103C series - * 工具 -> 端口：“COMX” -> COMX（X为设备对应端口号） - * 工具 -> Upload method -> Serial - * 进入目录C:\Users{username}\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1{版本名称}\libraries\USBComposite下，打开usb_hid.c文件，搜索bInterval，将该值修改为0x01，即轮询间隔修改为1ms - - 注意： - - * 上传程序前，先确认使用的轴的总键程是否为4mm，如果不是，需要修改 key 数组变量中代表 travel 一行的相关参数，单位0.1mm，即4mm的值为40。 - * 拔插USB后，正常情况下，屏幕会变黑，板子上的蓝灯会点亮一秒钟，点亮时不要动按键，这是在初始化。 - * 初始化后，每个按键都需要按下一次后才能正常使用，按下时要按到底。 - - 遇到困难的话参考以下资料： - - 设置参考： - - * https://github.com/rogerclarkmelbourne/Arduino_STM32 - * https://baijiahao.baidu.com/s?id=1727012582049990775&wfr=spider&for=pc - * https://blog.csdn.net/oChiTu1/article/details/108166233?depth_1-utm_source=distribute.pc_relevant.none-task-blog-2%7Edefault%7ECTRLIST%7ERate-2-108166233-blog-119909968.pc_relevant_3mothn_strategy_and_data_recovery - - 项目参考： - - * Rapid trigger功能：https://github.com/chent7/hall-2k-keypad-handmade - * STM32触盘：https://mp.weixin.qq.com/s/o-8_3SQS2AGT_WTyTLYQnA - * UI：https://www.bilibili.com/video/BV1HA411S7pv/ ; https://www.bilibili.com/video/BV1xd4y1C7BE/ - - 本项目使用Apache 2.0开源协议，如需商用或借鉴，请阅读此协议。 - - 欢迎关注我的B站账号，一个只分享osu!相关内容，很无聊的帐号。 - - 用户名：音游玩的人，B站主页：https://space.bilibili.com/9182439?spm_id_from=..0.0 -*/ - -/************************************* 屏幕和UI *************************************/ - -#include -#include - -#define SCL PB6 -#define SDA PB7 -#define RST U8X8_PIN_NONE - -U8G2_SSD1306_128X64_NONAME_F_HW_I2C u8g2(U8G2_R0, SCL, SDA, RST); // 分辨率：128*64 驱动：SSD1306 接口：IIC（硬件） -//U8G2_SSD1306_128X32_UNIVISION_F_HW_I2C u8g2(U8G2_R0, SCL, SDA, RST); // 分辨率：128*32 驱动：SSD1306 接口：IIC（硬件） - -/************************************* USB 相关 *************************************/ - -#include - -USBHID HID; - -const uint8_t reportDescription[] = -{ - HID_CONSUMER_REPORT_DESCRIPTOR(), - HID_KEYBOARD_REPORT_DESCRIPTOR() -}; - -HIDConsumer Consumer(HID); -HIDKeyboard Keyboard(HID); - -void hid_init() -{ - HID.begin(reportDescription, sizeof(reportDescription)); - while (!USBComposite); -} - -/************************************* 按键相关 *************************************/ - -// 按键参数 -#define KEYS 10 -#define LIGHT PC13 -#define TRIGGER 0 -#define RELEASE 1 -#define TOP 2 -#define BOTTOM 3 -#define TIMES 4 -#define CODES 5 -#define MODES 6 -#define PINS 7 -#define TRAVEL 8 - -// 按键变量 -uint8_t key [9][KEYS + 1] = -{ - // key0 key1 key2 key3 key4 key5 key6 key7 key8 key9 all - { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, // trigger - { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, // release - { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, // top - { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, // bottom - { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5 }, // times - { 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k' }, // codes - { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 }, // modes - { PA0, PA1, PA2, PA3, PA4, PA5, PA6, PA7, PB0, PB1, PB1 }, // pins - { 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40 }, // travel -}; - -/************************************* 按键扫描 *************************************/ - -// 按键参数结构体 -struct -{ - int min; - int max; - int trigger; - int release; - int value; - int reference; - int unit; - int cushion; - bool init; - bool pressed; -} keyx[KEYS]; - -/************************************* 不分模式 *************************************/ - -// 初始化 -void key_init() -{ - // 打开初始化指示灯 - pinMode(LIGHT, OUTPUT); - digitalWrite(LIGHT, LOW); - - // 读模拟量，最大值和最小值先暂定为当前值 - for (uint8_t n = 0; n < KEYS; ++n) - { - pinMode(key[PINS][n],INPUT_ANALOG); - keyx[n].value = analogRead(key[PINS][n]); - keyx[n].min = keyx[n].value; - keyx[n].max = keyx[n].value; - } - - // 并行扫描所有传感器，记录每个传感器的初始抖动范围，每1ms扫描一次，扫描1s - for (int i = 0; i < 1000; ++i) - { - for (uint8_t n = 0; n < KEYS; ++n) - { - keyx[n].value = analogRead(key[PINS][n]); - if (keyx[n].value < keyx[n].min) - { - keyx[n].min = keyx[n].value; - } - else if (keyx[n].value > keyx[n].max) - { - keyx[n].max = keyx[n].value; - } - } - delay(1); - } - - for (uint8_t n = 0; n < KEYS; ++n) - { - keyx[n].cushion = (keyx[n].max - keyx[n].min) * key[TIMES][n]; // 计算缓冲值 - - // 初始化一些参数 - keyx[n].init = false; // 按键还没有被首次按下 - keyx[n].reference = keyx[n].value; // 初始化参考值为当前值 - keyx[n].trigger = key[TRIGGER][n] * keyx[n].cushion; // 初始化触发值，避免插上的瞬间有输入 - keyx[n].release = key[RELEASE][n] * keyx[n].cushion; // 初始化释放值，避免插上的瞬间有输入 - - if (key[MODES][n] == 1) - { - keyx[n].min = keyx[n].value; // 初始化最小值，暂定为当前值 - keyx[n].max = keyx[n].value + keyx[n].cushion; // 初始化最大值，暂定为当前值 + 缓冲值 - } - else if (key[MODES][n] == 2) - { - keyx[n].min = keyx[n].value - keyx[n].cushion; // 初始化最小值，暂定为当前值 - keyx[n].max = keyx[n].value; // 初始化最大值，暂定为当前值 + 缓冲值 - } - } - - // 关闭初始化指示灯 - digitalWrite(LIGHT, HIGH); -} - -// 转换距离，将以毫米为单位的值转换成模拟量，假设磁铁外磁场强度均匀变化，则距离与模拟量线性相关 -void convertDistance(uint8_t n) -{ - keyx[n].unit = (keyx[n].max - keyx[n].min) / key[TRAVEL][n]; - keyx[n].trigger = keyx[n].unit * key[TRIGGER][n]; - keyx[n].release = keyx[n].unit * key[RELEASE][n]; -} - -/************************************* 区分模式 *************************************/ - -/************************************* 模式 1 *************************************/ - -// 按下按键，发送后改变按键状态，按键首次被按下 -void pressKey_1(uint8_t n) -{ - if (keyx[n].init) - { - Keyboard.press(key[CODES][n]); - } - else if (keyx[n].value > keyx[n].min + keyx[n].cushion) - { - keyx[n].init = true; - } - keyx[n].pressed = true; -} - -// 释放按键，发送后改变按键状态，按键首次被按下 -void releaseKey_1(uint8_t n) -{ - if (keyx[n].init) - { - Keyboard.release(key[CODES][n]); - } - else if (keyx[n].value > keyx[n].min + keyx[n].cushion) - { - keyx[n].init = true; - } - keyx[n].pressed = false; -} - -// 平衡按键，按下时探索更大的值，释放时探索更小的值，以免在使用时极值漂移使抖动能误触发 -void balanceKey_1(uint8_t n) -{ - if (!keyx[n].pressed && (keyx[n].value < keyx[n].min)) - { - keyx[n].min = keyx[n].value; - convertDistance(n); - } - else if (keyx[n].pressed && (keyx[n].value > keyx[n].max)) - { - keyx[n].max = keyx[n].value; - convertDistance(n); - } -} - -// 按键移动时判断状态，同时动态改变参考值 -void processKey_1(uint8_t n) -{ - // 不在死区移动时的判断 - if ((keyx[n].value > keyx[n].min + keyx[n].unit * key[TOP][n]) && (keyx[n].value < keyx[n].max - keyx[n].unit * key[BOTTOM][n])) - { - if (!keyx[n].pressed) - { - if (keyx[n].value > keyx[n].reference + keyx[n].trigger) - { - pressKey_1(n); - } - else if (keyx[n].value < keyx[n].reference) - { - keyx[n].reference = keyx[n].value; - } - } - else - { - if (keyx[n].value <= keyx[n].reference - keyx[n].release) - { - releaseKey_1(n); - } - else if (keyx[n].value > keyx[n].reference) - { - keyx[n].reference = keyx[n].value; - } - } - } - - // 在死区移动时的判断 - else if ((keyx[n].value < keyx[n].min + keyx[n].unit * key[TOP][n]) && keyx[n].pressed) - { - releaseKey_1(n); - } - else if ((keyx[n].value > keyx[n].max - keyx[n].unit * key[BOTTOM][n]) && !keyx[n].pressed) - { - pressKey_1(n); - } -} - -/************************************* 模式 2 *************************************/ - -// 按下按键，发送后改变按键状态，按键首次被按下 -void pressKey_2(uint8_t n) -{ - if (keyx[n].init) - { - Keyboard.press(key[CODES][n]); - } - else if (keyx[n].value < keyx[n].max - keyx[n].cushion) - { - keyx[n].init = true; - } - keyx[n].pressed = true; -} - -// 释放按键，发送后改变按键状态，按键首次被按下 -void releaseKey_2(uint8_t n) -{ - if (keyx[n].init) - { - Keyboard.release(key[CODES][n]); - } - else if (keyx[n].value < keyx[n].min - keyx[n].cushion) - { - keyx[n].init = true; - } - keyx[n].pressed = false; -} - -// 平衡按键，按下时探索更小的值，释放时探索更大的值，以免在使用时极值漂移使抖动能误触发 -void balanceKey_2(uint8_t n) -{ - if (keyx[n].pressed && (keyx[n].value < keyx[n].min)) - { - keyx[n].min = keyx[n].value; - convertDistance(n); - } - else if (!keyx[n].pressed && (keyx[n].value > keyx[n].max)) - { - keyx[n].max = keyx[n].value; - convertDistance(n); - } -} - -// 按键移动时判断状态，同时动态改变参考值 -void processKey_2(uint8_t n) -{ - // 不在死区移动时的判断 - if ((keyx[n].value > keyx[n].min + keyx[n].unit * key[BOTTOM][n]) && (keyx[n].value < keyx[n].max - keyx[n].unit * key[TOP][n])) - { - if (!keyx[n].pressed) - { - if (keyx[n].value < keyx[n].reference - keyx[n].trigger) - { - pressKey_2(n); - } - else if (keyx[n].value > keyx[n].reference) - { - keyx[n].reference = keyx[n].value; - } - } - else - { - if (keyx[n].value >= keyx[n].reference + keyx[n].release) - { - releaseKey_2(n); - } - else if (keyx[n].value < keyx[n].reference) - { - keyx[n].reference = keyx[n].value; - } - } - } - - // 在死区移动时的判断 - else if ((keyx[n].value < keyx[n].min + keyx[n].unit * key[BOTTOM][n]) && !keyx[n].pressed) - { - pressKey_2(n); - } - else if ((keyx[n].value > keyx[n].max - keyx[n].unit * key[TOP][n]) && keyx[n].pressed) - { - releaseKey_2(n); - } -} - -// 扫描一次按键 -void runKey(uint8_t n) -{ - if (key[MODES][n] == 1) - { - keyx[n].value = analogRead(key[PINS][n]); - balanceKey_1(n); - processKey_1(n); - } - else if (key[MODES][n] == 2) - { - keyx[n].value = analogRead(key[PINS][n]); - balanceKey_2(n); - processKey_2(n); - } -} - -/************************************* 定义页面 *************************************/ - -//总目录 -enum -{ - M_SLEEP, - M_MAIN, - M_EDITOR, - M_EDIT, - M_EDITING, - M_CODE, - M_ALPH, - M_NUMB, - M_FUNC, - M_MORE, - M_MODE, - M_MEASURE, - M_VOLTAGE, - M_SETTINGS, - M_CONTROLLER, - M_KNOB, - M_ABOUT, -}; - -//状态 -enum -{ - S_NONE, - S_DISAPPEAR, -}; - -//菜单结构体 -typedef struct MENU -{ - char *m_select; -} M_SELECT; - -/************************************* 定义内容 *************************************/ - -/************************************* 文字内容 *************************************/ - -M_SELECT main_menu[] -{ - {"Sleep"}, - {"Editor"}, - {"Measure"}, - {"Settings"}, -}; - -M_SELECT editor_menu[] -{ - {"<< Main Menu"}, - {"- Key 0"}, - {"- Key 1"}, - {"- Key 2"}, - {"- Key 3"}, - {"- Key 4"}, - {"- Key 5"}, - {"- Key 6"}, - {"- Key 7"}, - {"- Key 8"}, - {"- Key 9"}, - {"- All"}, -}; - -M_SELECT edit_menu[] -{ - {"<< Select Keys"}, - {"- Trigger"}, - {"- Release"}, - {"- Top"}, - {"- Bottom"}, - {"- Times"}, - {"- Codes"}, - {"- Modes"}, -}; - -M_SELECT code_menu[] -{ - {"<< Editor Menu"}, - {"- Alphabet"}, - {"- Number"}, - {"- Function"}, - {"- More"}, -}; - -M_SELECT alph_menu[] -{ - {"<< Code Category"}, - {"- a"}, - {"- b"}, - {"- c"}, - {"- d"}, - {"- e"}, - {"- f"}, - {"- g"}, - {"- h"}, - {"- i"}, - {"- j"}, - {"- k"}, - {"- l"}, - {"- m"}, - {"- n"}, - {"- o"}, - {"- p"}, - {"- q"}, - {"- r"}, - {"- s"}, - {"- t"}, - {"- u"}, - {"- v"}, - {"- w"}, - {"- x"}, - {"- y"}, - {"- z"}, -}; - -M_SELECT numb_menu[] -{ - {"<< Code Category"}, - {"- 0"}, - {"- 1"}, - {"- 2"}, - {"- 3"}, - {"- 4"}, - {"- 5"}, - {"- 6"}, - {"- 7"}, - {"- 8"}, - {"- 9"}, -}; - -M_SELECT func_menu[] -{ - {"<< Code Category"}, - {"- F1"}, - {"- F2"}, - {"- F3"}, - {"- F4"}, - {"- F5"}, - {"- F6"}, - {"- F7"}, - {"- F8"}, - {"- F9"}, - {"- F10"}, - {"- F11"}, - {"- F12"}, -}; - -M_SELECT more_menu[] -{ - {"<< Code Category"}, - {"- LEFT CTRL"}, - {"- RIGHT CTRL"}, - {"- LEFT SHIFT"}, - {"- RIGHT SHIFT"}, - {"- LEFT ALT"}, - {"- RIGHT ALT"}, - {"- LEFT GUI"}, - {"- RIGHT GUI"}, - {"- UP ARROW"}, - {"- DOWN ARROW"}, - {"- LEFT ARROW"}, - {"- RIGHT ARROW"}, - {"- BACKSPACE"}, - {"- TAB"}, - {"- RETURN"}, - {"- ESC"}, - {"- INSERT"}, - {"- DELETE"}, - {"- PAGE UP"}, - {"- PAGE DOWN"}, - {"- HOME"}, - {"- END"}, - {"- CAPS LOCK"}, -}; - -M_SELECT mode_menu[] -{ - {"<< Editor Menu"}, - {"- Mode 1"}, - {"- Mode 2"}, - {"- Disable"}, -}; - -M_SELECT measure_menu[] -{ - {"<< Main Menu"}, - {"- Key 0 : PA 0"}, - {"- Key 1 : PA 1"}, - {"- Key 2 : PA 2"}, - {"- Key 3 : PA 3"}, - {"- Key 4 : PA 4"}, - {"- Key 5 : PA 5"}, - {"- Key 6 : PA 6"}, - {"- Key 7 : PA 7"}, - {"- Key 8 : PB 0"}, - {"- Key 9 : PB 1"}, -}; - -M_SELECT settings_menu[] -{ - {"<< Main Menu"}, - {"- Knob Function"}, - {"- OLED Brightness"}, - {"- Main Ans Speed"}, - {"- List Ans Speed"}, - {"- Volt Ans Speed"}, - {"- Fade Ans Speed"}, - {"- Loop Mode"}, - {"- Switch Style"}, - {"- Switch Knob"}, - {"- [ About ]"}, -}; - -M_SELECT knob_menu[] -{ - {"<< Settings Menu"}, - {"- Volume"}, - {"- Brightness"}, - {"- Disable"}, -}; - -/************************************* 图片内容 *************************************/ - -//主菜单图片 -PROGMEM const uint8_t main_icon_pic[][120] -{ - { - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xF1,0x3F, - 0xFF,0xFF,0xC3,0x3F,0xFF,0xFF,0x87,0x3F,0xFF,0xFF,0x07,0x3F,0xFF,0xFF,0x0F,0x3E, - 0xFF,0xFF,0x0F,0x3E,0xFF,0xFF,0x0F,0x3C,0xFF,0xFF,0x0F,0x3C,0xFF,0xFF,0x0F,0x38, - 0xFF,0xFF,0x0F,0x38,0xFF,0xFF,0x0F,0x38,0xFF,0xFF,0x07,0x38,0xFF,0xFF,0x07,0x38, - 0xFF,0xFF,0x03,0x38,0xF7,0xFF,0x01,0x38,0xE7,0xFF,0x00,0x3C,0x87,0x3F,0x00,0x3C, - 0x0F,0x00,0x00,0x3E,0x0F,0x00,0x00,0x3E,0x1F,0x00,0x00,0x3F,0x3F,0x00,0x80,0x3F, - 0x7F,0x00,0xC0,0x3F,0xFF,0x01,0xF0,0x3F,0xFF,0x07,0xFC,0x3F,0xFF,0xFF,0xFF,0x3F, - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F - - }, - { - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xF9,0xE7,0x3F, - 0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F,0xFF,0xF0,0xE7,0x3F,0x7F,0xE0,0xE7,0x3F, - 0x7F,0xE0,0xC3,0x3F,0x7F,0xE0,0xC3,0x3F,0x7F,0xE0,0xC3,0x3F,0x7F,0xE0,0xE7,0x3F, - 0xFF,0xF0,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F, - 0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xC3,0x3F,0xFF,0xF9,0x81,0x3F,0xFF,0xF0,0x81,0x3F, - 0xFF,0xF0,0x81,0x3F,0xFF,0xF0,0x81,0x3F,0xFF,0xF9,0x81,0x3F,0xFF,0xF9,0xC3,0x3F, - 0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F,0xFF,0xF9,0xE7,0x3F,0xFF,0xFF,0xFF,0x3F, - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F - }, - { - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xDF,0x3F, - 0xFF,0xFF,0x8F,0x3F,0xFF,0xFF,0x07,0x3F,0xFF,0xFF,0x03,0x3E,0xFF,0xFF,0x01,0x3C, - 0xFF,0xFF,0x00,0x38,0xFF,0x7F,0x40,0x3C,0xFF,0x3F,0x80,0x3E,0xFF,0x1F,0x00,0x3F, - 0xFF,0x0F,0x88,0x3F,0xFF,0x07,0xD0,0x3F,0xFF,0x03,0xE0,0x3F,0xFF,0x01,0xF1,0x3F, - 0xFF,0x00,0xFA,0x3F,0x7F,0x00,0xFC,0x3F,0x3F,0x20,0xFE,0x3F,0x1F,0x40,0xFF,0x3F, - 0x0F,0x80,0xFF,0x3F,0x07,0xC4,0xFF,0x3F,0x0F,0xE8,0xFF,0x3F,0x1F,0xF0,0xFF,0x3F, - 0x3F,0xF8,0xFF,0x3F,0x7F,0xFC,0xFF,0x3F,0xFF,0xFE,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F, - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F - }, - { - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F, - 0xFF,0x1F,0xFE,0x3F,0xFF,0x1F,0xFE,0x3F,0xFF,0x0C,0xCC,0x3F,0x7F,0x00,0x80,0x3F, - 0x3F,0x00,0x00,0x3F,0x3F,0xE0,0x01,0x3F,0x7F,0xF8,0x87,0x3F,0x7F,0xFC,0x8F,0x3F, - 0x3F,0xFC,0x0F,0x3F,0x0F,0x3E,0x1F,0x3C,0x0F,0x1E,0x1E,0x3C,0x0F,0x1E,0x1E,0x3C, - 0x0F,0x3E,0x1F,0x3C,0x3F,0xFC,0x0F,0x3F,0x7F,0xFC,0x8F,0x3F,0x7F,0xF8,0x87,0x3F, - 0x3F,0xE0,0x01,0x3F,0x3F,0x00,0x00,0x3F,0x7F,0x00,0x80,0x3F,0xFF,0x0C,0xCC,0x3F, - 0xFF,0x1F,0xFE,0x3F,0xFF,0x1F,0xFE,0x3F,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F, - 0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0x3F - }, -}; - -/************************************* 页面变量 *************************************/ - -//OLED变量 -uint8_t *buf_ptr; -uint16_t buf_len; -uint8_t display_width; -uint8_t display_height; - -//控制器变量 -struct -{ - uint8_t select = 0; - uint8_t value[9] = { 100, 25, 25, 25, 15, 1, 0, 0, 0 }; //OLED亮度，主页面动画速度，列表动画速度，电压页面动画速度，消失动画速度，旋钮功能，循环列表，主菜单风格，旋钮方向 -} controller; - -//UI变量 -#define UI_DEPTH 20 -struct -{ - bool init; - uint8_t num; - uint8_t select[UI_DEPTH]; - uint8_t select_last; - uint8_t layer = 0; - uint8_t index = M_SLEEP; - uint8_t state = S_NONE; - int16_t indicator_y; - int16_t indicator_y_trg; - bool sleep = true; - uint8_t disappear = 1; -} ui; - -//主菜单变量 -#define ICON_INDICATOR_WIDTH 0 //在128*32分辨率时，图标下方有两个像素的空隙，可以在中心图标下方显示指示器，这是指示器的宽度 -#define ICON_HEIGHT 30 -#define ICON_WIDTH 30 -#define ICON_SPACE 36 -#define TITLE_HIGH 14 -#define TITLE_SPACE 36 -#define TITLE_Y 77 -#define TITLE_Y_TRG 58 -#define TITLE_INDICATOR_WIDTH 7 -#define TITLE_INDICATOR_HEIGHT 27 -struct -{ - int16_t icon; - int16_t icon_trg; - int16_t indicator_x = 0; - int16_t indicator_x_trg = TITLE_INDICATOR_WIDTH; - int16_t title_y; - int16_t title_y_trg; - bool select_flag = false; -} tile; - -//进入主菜单时的初始化 -void main_param_init() -{ - switch (controller.value[7]) - { - case 0: - ui.init = true; - ui.indicator_y = 0; - tile.icon = 0; - tile.icon_trg = - ui.select[ui.layer] * ICON_SPACE; - tile.title_y = 0; - tile.title_y_trg = - ui.select[ui.layer] * TITLE_SPACE; - break; - - case 1: - ui.init = false; - ui.select_last = ui.select[ui.layer] + 1; - tile.icon = 0; - tile.icon_trg = ICON_SPACE; - tile.title_y = TITLE_Y; - tile.title_y_trg = TITLE_Y_TRG; - break; - } -} - -//列表变量 -#define LIST_BAR_WIDTH 7 -struct -{ - int16_t y; - int16_t y_trg; - int16_t box_x; - int16_t box_x_trg; - int16_t box_y; - int16_t box_y_trg[UI_DEPTH]; -} list; - -//进入更深层级时的初始化 -void list_param_init_in() -{ - //每次进入页面都有动画 - ui.layer++; - ui.init = 0; - ui.indicator_y = 0; - list.y = 0; - list.y_trg = 16; - list.box_x = 0; -} - -//进入更浅层级时的初始化 -void list_param_init_out() -{ - //离开当前页时重置当前页，确保下次来时从头开始 - ui.select[ui.layer] = 0; - list.box_y_trg[ui.layer] = 0; - - //每次进入页面都有动画 - ui.layer--; - ui.init = 0; - ui.indicator_y = 0; - list.y = 0; - list.y_trg = 16; - list.box_x = 0; -} - -//电压测量页面 -struct -{ - uint8_t left_space = 28; - uint8_t right_space = 28; - uint8_t up_space; - uint8_t down_space; - int16_t left; - int16_t left_trg; - int16_t right; - int16_t right_trg; - int16_t up; - int16_t up_trg; - int16_t down; - int16_t down_trg; -} focus; - -//进入电压测量界面的初始化 -void voltage_param_init() -{ - //每次进入页面都有动画 - focus.up_space = focus.down_space = (display_height - 28) / 2; - focus.left = 0; - focus.left_trg = focus.left_space; - focus.right = display_width - 1; - focus.right_trg = display_width - focus.right_space - 1; - focus.up = 0; - focus.up_trg = focus.up_space; - focus.down = display_height - 1; - focus.down_trg = display_height - focus.down_space - 1; -} - -//关于本机页面 -struct -{ - int16_t y; - int16_t y_trg; -} about; - -//进入关于本机界面的初始化 -void about_param_init() -{ - //每次进入页面都从头开始 - about.y = 0; - about.y_trg = 0; -} - -/************************************* 旋钮相关 *************************************/ - -#define AIO PB12 -#define BIO PB13 -#define SW PB14 - -#define DEBOUNCE 50 -uint8_t btn_id = 0; -uint8_t btn_flag = 0; -bool btn_val = false; -bool btn_val_last = false; -bool btn_pressed = false; -bool CW_1 = false; -bool CW_2 = false; - -void btn_inter() -{ - bool alv = digitalRead(AIO); - bool blv = digitalRead(BIO); - if (btn_flag == 0 && alv == LOW) - { - CW_1 = blv; - btn_flag = 1; - } - if (btn_flag && alv) - { - CW_2 = !blv; - if (CW_1 && CW_2) - { - btn_id = controller.value[8]; - btn_pressed = true; - } - if (CW_1 == false && CW_2 == false) - { - btn_id = !controller.value[8]; - btn_pressed = true; - } - btn_flag = 0; - } -} - -void btn_init() -{ - pinMode(AIO, INPUT); - pinMode(BIO, INPUT); - pinMode(SW, INPUT_PULLUP); - attachInterrupt(digitalPinToInterrupt(AIO), btn_inter, CHANGE); -} - -void btn_scan() -{ - btn_val = digitalRead(SW); - if (btn_val != btn_val_last) - { - delay(DEBOUNCE); - btn_val_last = btn_val; - if (btn_val == LOW) - { - btn_pressed = true; - btn_id = 2; - } - } -} - -/************************************* 断电保存 *************************************/ - -#include - -uint8_t init_check[11] = { 'a', 'b', 'c', 'd', 'e', 'f','g', 'h', 'i', 'j', 'k' }; -bool eeprom_change = false; -int address; - -//EEPROM写数据，回到主菜单时执行一遍 -void eeprom_write_all_data() -{ - address = 0; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, init_check[i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[0][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[1][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[2][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[3][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[4][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[5][i]); - address += 11; for (uint8_t i = 0; i < 11; ++i) EEPROM.write(address + i, key[6][i]); - address += 11; for (uint8_t i = 0; i < 9; ++i) EEPROM.write(address + i, controller.value[i]); -} - -//EEPROM读数据，开机初始化时执行一遍 -void eeprom_read_all_data() -{ - address = 11; for (uint8_t i = 0; i < 11; ++i) key[0][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[1][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[2][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[3][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[4][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[5][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 11; ++i) key[6][i] = EEPROM.read(address + i); - address += 11; for (uint8_t i = 0; i < 9; ++i) controller.value[i] = EEPROM.read(address + i); -} - -//开机检查是否已经修改过，没修改过则跳过读配置步骤，用默认设置 -void eeprom_init() -{ - uint8_t check = 0; - address = 0; for (uint8_t i = 0; i < 11; ++i) if (EEPROM.read(address + i) != init_check[i]) check ++; - if (check <= 1) eeprom_read_all_data(); -} - -/************************************* 动画函数 *************************************/ - -//移动函数 -void move(int16_t *a, int16_t *a_trg, uint8_t n) -{ - if (*a < *a_trg) *a += ceil(fabs((float)(*a_trg - *a) / (controller.value[n] / 10.0))); - else if (*a > *a_trg) *a -= ceil(fabs((float)(*a_trg - *a) / (controller.value[n] / 10.0))); -} - -//消失函数 -void disappear() -{ - delay(controller.value[4]); - switch (ui.disappear) - { - case 1: for (uint16_t i = 0; i < buf_len; ++i) if (i % 2 == 0) buf_ptr[i] = buf_ptr[i] & 0x55; break; - case 2: for (uint16_t i = 0; i < buf_len; ++i) if (i % 2 != 0) buf_ptr[i] = buf_ptr[i] & 0xAA; break; - case 3: for (uint16_t i = 0; i < buf_len; ++i) if (i % 2 == 0) buf_ptr[i] = buf_ptr[i] & 0x00; break; - case 4: for (uint16_t i = 0; i < buf_len; ++i) if (i % 2 != 0) buf_ptr[i] = buf_ptr[i] & 0x00; break; - default: ui.state = S_NONE; ui.disappear = 0; break; - } - ui.disappear++; -} - -/************************************* 显示函数 *************************************/ - -/********************************** 列表风格主菜单 ***********************************/ - -//主菜单列表风格显示函数 -void main_show_list() -{ - u8g2.setFont(u8g2_font_crox4hb_tr); - ui.indicator_y_trg = ceil((ui.select[ui.layer]) * ((float)display_height / (ui.num - 1))); - move(&tile.icon, &tile.icon_trg, 1); - move(&tile.title_y, &tile.title_y_trg, 1); - move(&ui.indicator_y, &ui.indicator_y_trg, 1); - u8g2.drawBox(display_width - TITLE_INDICATOR_WIDTH, 0, TITLE_INDICATOR_WIDTH, ui.indicator_y); - for(uint8_t i = 0 ; i < ui.num ; ++ i) - { - u8g2.drawXBMP(0, tile.icon + i * ICON_SPACE + 1 + (display_height - ICON_HEIGHT) / 2, ICON_WIDTH, ICON_HEIGHT, main_icon_pic[i]); - u8g2.drawStr(((display_width - u8g2.getStrWidth(main_menu[i].m_select)) / 2) + ceil((float)(ICON_WIDTH - TITLE_INDICATOR_WIDTH) / 2), tile.title_y + (i + 1) * TITLE_SPACE - TITLE_HIGH + (display_height - ICON_HEIGHT) / 2, main_menu[i].m_select); - } -} - -/************************************* 图标主菜单 *************************************/ - -//主菜单图标风格显示函数 -void main_show_icon() -{ - u8g2.setFont(u8g2_font_helvB18_tf); - move(&tile.icon, &tile.icon_trg, 1); - if (ui.select[ui.layer] != ui.select_last) - { - move(&tile.indicator_x, &tile.indicator_x_trg, 1); - move(&tile.title_y, &tile.title_y_trg, 1); - } - if (tile.select_flag) - { - tile.indicator_x = TITLE_INDICATOR_WIDTH; - tile.title_y = TITLE_Y_TRG; - } - if (tile.icon == tile.icon_trg && tile.indicator_x == tile.indicator_x_trg && tile.title_y == tile.title_y_trg) ui.select_last = ui.select[ui.layer]; - switch (display_height) - { - case 32: - u8g2.drawBox((display_width - ICON_INDICATOR_WIDTH) / 2, 31, ICON_INDICATOR_WIDTH, 1); - break; - - case 64: - u8g2.drawBox(0, display_height - TITLE_INDICATOR_HEIGHT - 1, tile.indicator_x, TITLE_INDICATOR_HEIGHT); - u8g2.drawStr(((display_width - u8g2.getStrWidth(main_menu[ui.select[ui.layer]].m_select)) / 2) + TITLE_INDICATOR_WIDTH, tile.title_y, main_menu[ui.select[ui.layer]].m_select); - break; - } - if (!ui.init) - { - for(uint8_t i = 0 ; i < ui.num ; ++ i) u8g2.drawXBMP((display_width - ICON_WIDTH) / 2 + (i - ui.select[ui.layer]) * tile.icon, 0, ICON_WIDTH, ICON_HEIGHT, main_icon_pic[i]); - if (tile.icon == tile.icon_trg) - { - ui.init = true; - tile.icon = tile.icon_trg = - ui.select[ui.layer] * ICON_SPACE; - } - } - else for(uint8_t i = 0 ; i < ui.num ; ++ i) u8g2.drawXBMP((display_width - ICON_WIDTH) / 2 + tile.icon + i * ICON_SPACE, 0, ICON_WIDTH, ICON_HEIGHT, main_icon_pic[i]); -} - -/*************************************************************************************/ - -//列表类页面通用显示函数 -void menu_ui_show(struct MENU arr[]) -{ - u8g2.setFont(u8g2_font_wqy12_t_chinese1); - ui.indicator_y_trg = ceil((ui.select[ui.layer]) * ((float)display_height / (ui.num - 1))); - list.box_x_trg = u8g2.getStrWidth(arr[ui.select[ui.layer]].m_select) + 8; - move(&list.y, &list.y_trg, 2); - move(&list.box_x, &list.box_x_trg, 2); - move(&list.box_y, &list.box_y_trg[ui.layer], 2); - move(&ui.indicator_y, &ui.indicator_y_trg, 2); - if (!ui.init) - { - for (uint8_t i = 0 ; i < ui.num ; ++ i) u8g2.drawStr(4, 12 + (i - ui.select[ui.layer]) * list.y + list.box_y_trg[ui.layer], arr[i].m_select); - if (list.y == list.y_trg) - { - ui.init = true; - list.y = list.y_trg = - 16 * ui.select[ui.layer] + list.box_y_trg[ui.layer]; - } - } - else for (uint8_t i = 0 ; i < ui.num ; ++ i) u8g2.drawStr(4, 16 * i + list.y + 12, arr[i].m_select); - u8g2.drawBox(display_width - LIST_BAR_WIDTH, 0, LIST_BAR_WIDTH, ui.indicator_y); - u8g2.setDrawColor(2); - u8g2.drawRBox(0, list.box_y, list.box_x, 16, 1); - u8g2.setDrawColor(1); -} - -//正在编辑界面显示函数 -void editing_show() -{ - uint8_t editing_up_space = (display_height - 32) / 2; - u8g2.setDrawColor(0); - u8g2.drawRBox(12, editing_up_space, 104, 32, 8); - u8g2.setDrawColor(1); - u8g2.drawRFrame(12, editing_up_space, 104, 32, 8); - u8g2.drawRFrame(18, editing_up_space + 19, 92, 8, 3); - float width = (float)(key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1]) / (float)(key[TRAVEL][ui.select[ui.layer - 1] - 1]) * 86; - if (width) u8g2.drawRBox(20, editing_up_space + 21, width + 2, 4, 1); - u8g2.setCursor(20, editing_up_space + 14); - switch (ui.select[ui.layer]) - { - case 1: u8g2.print("Trigger"); break; - case 2: u8g2.print("Release"); break; - case 3: u8g2.print("Top"); break; - case 4: u8g2.print("Bottom"); break; - case 5: u8g2.print("Times"); break; - } - u8g2.setCursor(96, editing_up_space + 14); - u8g2.print(key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1]); -} - -//控制器正在编辑界面显示函数 -void controller_show() -{ - uint8_t max_value; - uint8_t cursor_pos; - switch (controller.select) - { - case 0: max_value = 255; cursor_pos = 90; break; - case 1: max_value = 90; cursor_pos = 96; break; - case 2: max_value = 90; cursor_pos = 96; break; - case 3: max_value = 90; cursor_pos = 96; break; - case 4: max_value = 50; cursor_pos = 96; break; - } - uint8_t editing_up_space = (display_height - 32) / 2; - u8g2.setDrawColor(0); - u8g2.drawRBox(12, editing_up_space, 104, 32, 8); - u8g2.setDrawColor(1); - u8g2.drawRFrame(12, editing_up_space, 104, 32, 8); - u8g2.drawRFrame(18, editing_up_space + 19, 92, 8, 3); - float width = (float)controller.value[controller.select] / (float)max_value * 85; - if (width) u8g2.drawRBox(20, editing_up_space + 21, width + 3, 4, 1); - u8g2.setCursor(20, editing_up_space + 14); - switch (ui.select[ui.layer]) - { - case 2: u8g2.print("Brightness"); break; - case 3: u8g2.print("Main Speed"); break; - case 4: u8g2.print("List Speed"); break; - case 5: u8g2.print("Volt Speed"); break; - case 6: u8g2.print("Fade Speed"); break; - } - u8g2.setCursor(cursor_pos, editing_up_space + 14); - u8g2.print(controller.value[controller.select]); -} - -//电压测量页面显示函数 -void voltage_show() -{ - move(&focus.left, &focus.left_trg, 3); - move(&focus.right, &focus.right_trg, 3); - move(&focus.up, &focus.up_trg, 3); - move(&focus.down, &focus.down_trg, 3); - u8g2.setDrawColor(0); - u8g2.setFont(u8g2_font_crox4hb_tr); - u8g2.drawBox(0, 0, display_width, display_height); - u8g2.setDrawColor(1); - u8g2.drawRBox(focus.left, focus.up, focus.right - focus.left, focus.down - focus.up, 8); - float pin_val = analogRead(key[PINS][ui.select[ui.layer - 1] - 1]); - float pin_vol = (pin_val / 4096) * 3.3; - u8g2.setDrawColor(0); - u8g2.setCursor(36, focus.up_space + 21); - u8g2.print(pin_vol); - u8g2.print(" v"); - u8g2.setDrawColor(1); -} - -//关于本机界面显示函数 -void about_show() -{ - move(&about.y, &about.y_trg, 2); - u8g2.setFont(u8g2_font_t0_11_tf); - u8g2.setCursor(0, 10 - about.y); - u8g2.print("K"); - u8g2.setCursor(10 + 16 * 0, 10 - about.y); - u8g2.print("TR"); - u8g2.setCursor(10 + 16 * 1, 10 - about.y); - u8g2.print("RL"); - u8g2.setCursor(10 + 16 * 2, 10 - about.y); - u8g2.print("TP"); - u8g2.setCursor(10 + 16 * 3, 10 - about.y); - u8g2.print("BT"); - u8g2.setCursor(10 + 16 * 4, 10 - about.y); - u8g2.print("TM"); - u8g2.setCursor(10 + 16 * 5, 10 - about.y); - u8g2.print("MD"); - u8g2.setCursor(10 + 16 * 6, 10 - about.y); - u8g2.print("CD"); - for (uint8_t i = 0; i < 7; ++i) u8g2.drawBox(8 + 16 * i, 0 - about.y, 1, 130); - for (uint8_t j = 0; j < 10; ++j) - { - u8g2.setCursor(0, 22 + 12 * j - about.y); - u8g2.print(j); - for (uint8_t i = 0; i < 7; ++i) - { - u8g2.setCursor(10 + 16 * i, 22 + 12 * j - about.y); - if (i == 5) u8g2.print(key[6][j]); - else if (i == 6) u8g2.print(key[5][j]); - else u8g2.print(key[i][j]); - } - } -} - -/************************************* 处理函数 *************************************/ - -//列表类页面旋转时判断通用函数 -void rotate_switch() -{ - switch (btn_id) - { - case 0: - if (ui.select[ui.layer] == 0) - { - if (controller.value[6]) - { - ui.select[ui.layer] = ui.num - 1; - list.y_trg = - 16 * (ui.num - display_height / 16); - list.box_y_trg[ui.layer] = (display_height / 16 - 1) * 16; - break; - } - else break; - } - if (ui.init) - { - ui.select[ui.layer] -= 1; - if (ui.select[ui.layer] < -(list.y / 16)) list.y_trg += 16; - else list.box_y_trg[ui.layer] -= 16; - break; - } - - case 1: - if (ui.select[ui.layer] == (ui.num - 1)) - { - if (controller.value[6]) - { - ui.select[ui.layer] = 0; - list.y_trg = 0; - list.box_y_trg[ui.layer] = 0; - break; - } - else break; - } - if (ui.init) - { - ui.select[ui.layer] += 1; - if ((ui.select[ui.layer] + 1) > (display_height / 16 - list.y / 16)) list.y_trg -= 16; - else list.box_y_trg[ui.layer] += 16; - break; - } - break; - } -} - -//睡眠页面处理函数 -void sleep_proc() -{ - while (ui.sleep) - { - //按键扫描 - for (int n = 0; n < KEYS; n++) runKey(n); - - //旋钮扫描 - btn_scan(); - if (btn_pressed) - { - btn_pressed = false; - - switch (btn_id) - { - case 0: //顺时针旋转 - switch (controller.value[5]) - { - case 1: Consumer.press(HIDConsumer::VOLUME_UP); Consumer.release(); break; - case 2: Consumer.press(HIDConsumer::BRIGHTNESS_UP); Consumer.release(); break; - } - break; - - case 1: //逆时针旋转 - switch (controller.value[5]) - { - case 1: Consumer.press(HIDConsumer::VOLUME_DOWN); Consumer.release(); break; - case 2: Consumer.press(HIDConsumer::BRIGHTNESS_DOWN); Consumer.release(); break; - } - break; - - case 2: - ui.index = M_MAIN; - ui.state = S_NONE; - ui.sleep = false; - u8g2.setPowerSave(0); - main_param_init(); - break; - } - } - } -} - -void main_proc(void) -{ - ui.num = sizeof(main_menu) / sizeof(M_SELECT); - switch (controller.value[7]) - { - case 0: main_show_list(); break; - case 1: main_show_icon(); break; - } - if(btn_pressed) - { - btn_pressed = false; - if (controller.value[7]) - { - tile.indicator_x = 0; - tile.title_y = TITLE_Y; - } - switch(btn_id) - { - case 0: - if (ui.init) - { - if (ui.select[ui.layer] > 0) - { - ui.select_last = ui.select[ui.layer]; - ui.select[ui.layer] -= 1; - tile.icon_trg += ICON_SPACE; - tile.select_flag = false; - if (!controller.value[7]) tile.title_y_trg += TITLE_SPACE; - } - else - { - if (controller.value[6]) - { - ui.select[ui.layer] = ui.num - 1; - tile.icon_trg = - ICON_SPACE * (ui.num - 1); - if (!controller.value[7]) tile.title_y_trg = - TITLE_SPACE * (ui.num - 1); - break; - } - else tile.select_flag = true; - } - } - break; - - case 1: - if (ui.init) - { - if (ui.select[ui.layer] < (ui.num - 1)) - { - ui.select_last = ui.select[ui.layer]; - ui.select[ui.layer] += 1; - tile.icon_trg -= ICON_SPACE; - tile.select_flag = false; - if (!controller.value[7]) tile.title_y_trg -= TITLE_SPACE; - } - else - { - if (controller.value[6]) - { - ui.select[ui.layer] = 0; - tile.icon_trg = 0; - if (!controller.value[7]) tile.title_y_trg = 0; - break; - } - else tile.select_flag = true; - } - } - break; - - case 2: - switch (ui.select[ui.layer]) - { - case 0: - ui.index = M_SLEEP; - ui.state = S_NONE; - u8g2.setPowerSave(1); - ui.sleep = true; - key_init(); - if (eeprom_change == true) - { - eeprom_write_all_data(); - eeprom_change = false; - } - break; - - case 1: ui.index = M_EDITOR; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 2: ui.index = M_MEASURE; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 3: ui.index = M_SETTINGS; ui.state = S_DISAPPEAR; list_param_init_in(); break; - } - break; - } - } -} - -void editor_proc() -{ - ui.num = sizeof(editor_menu) / sizeof(M_SELECT); - menu_ui_show(editor_menu); - list.box_x_trg = u8g2.getStrWidth(editor_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 0: ui.index = M_MAIN; ui.state = S_DISAPPEAR; list_param_init_out(); main_param_init(); break; - case 1: - case 2: - case 3: - case 4: - case 5: - case 6: - case 7: - case 8: - case 9: - case 10: - case 11: ui.index = M_EDIT; ui.state = S_DISAPPEAR; list_param_init_in(); break; - } - break; - } - } -} - -void edit_proc() -{ - ui.num = sizeof(edit_menu) / sizeof(M_SELECT); - menu_ui_show(edit_menu); - list.box_x_trg = u8g2.getStrWidth(edit_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 0: ui.index = M_EDITOR; ui.state = S_DISAPPEAR; list_param_init_out(); break; - case 1: - case 2: - case 3: - case 4: - case 5: ui.index = M_EDITING; ui.state = S_NONE; break; - case 6: ui.index = M_CODE; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 7: ui.index = M_MODE; ui.state = S_DISAPPEAR; list_param_init_in(); break; - } - break; - } - } -} - -//正在编辑页面处理函数 -void editing_proc() -{ - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: - if (key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1] < key[TRAVEL][ui.select[ui.layer - 1] - 1]) key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1] += 1; - eeprom_change = true; - break; - - case 1: - if (key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1] > 0) key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1] -= 1; - eeprom_change = true; - break; - - case 2: - if (ui.select[ui.layer - 1] == 11) for (uint8_t i = 0 ; i < KEYS ; ++i) key[ui.select[ui.layer] - 1][i] = key[ui.select[ui.layer] - 1][ui.select[ui.layer - 1] - 1]; - ui.index = M_EDIT; - ui.state = S_NONE; - break; - } - } - menu_ui_show(edit_menu); - for (uint16_t i = 0; i < buf_len; ++i) buf_ptr[i] = buf_ptr[i] & (i % 2 == 0 ? 0x55 : 0xAA); - editing_show(); -} - -void code_proc() -{ - ui.num = sizeof(code_menu) / sizeof(M_SELECT); - menu_ui_show(code_menu); - list.box_x_trg = u8g2.getStrWidth(code_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 0: if (ui.select[ui.layer - 2] == 11) for (uint8_t i = 0 ; i < KEYS ; ++i) key[CODES][i] = key[CODES][ui.select[ui.layer - 2] - 1]; - ui.index = M_EDIT; ui.state = S_DISAPPEAR; list_param_init_out(); break; - case 1: ui.index = M_ALPH; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 2: ui.index = M_NUMB; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 3: ui.index = M_FUNC; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 4: ui.index = M_MORE; ui.state = S_DISAPPEAR; list_param_init_in(); break; - } - break; - } - } -} - -void alph_proc() -{ - ui.num = sizeof(alph_menu) / sizeof(M_SELECT); - menu_ui_show(alph_menu); - list.box_x_trg = u8g2.getStrWidth(alph_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: key[CODES][ui.select[ui.layer - 3] - 1] = 'a'; eeprom_change = true; break; - case 2: key[CODES][ui.select[ui.layer - 3] - 1] = 'b'; eeprom_change = true; break; - case 3: key[CODES][ui.select[ui.layer - 3] - 1] = 'c'; eeprom_change = true; break; - case 4: key[CODES][ui.select[ui.layer - 3] - 1] = 'd'; eeprom_change = true; break; - case 5: key[CODES][ui.select[ui.layer - 3] - 1] = 'e'; eeprom_change = true; break; - case 6: key[CODES][ui.select[ui.layer - 3] - 1] = 'f'; eeprom_change = true; break; - case 7: key[CODES][ui.select[ui.layer - 3] - 1] = 'g'; eeprom_change = true; break; - case 8: key[CODES][ui.select[ui.layer - 3] - 1] = 'h'; eeprom_change = true; break; - case 9: key[CODES][ui.select[ui.layer - 3] - 1] = 'i'; eeprom_change = true; break; - case 10: key[CODES][ui.select[ui.layer - 3] - 1] = 'j'; eeprom_change = true; break; - case 11: key[CODES][ui.select[ui.layer - 3] - 1] = 'k'; eeprom_change = true; break; - case 12: key[CODES][ui.select[ui.layer - 3] - 1] = 'l'; eeprom_change = true; break; - case 13: key[CODES][ui.select[ui.layer - 3] - 1] = 'm'; eeprom_change = true; break; - case 14: key[CODES][ui.select[ui.layer - 3] - 1] = 'n'; eeprom_change = true; break; - case 15: key[CODES][ui.select[ui.layer - 3] - 1] = 'o'; eeprom_change = true; break; - case 16: key[CODES][ui.select[ui.layer - 3] - 1] = 'p'; eeprom_change = true; break; - case 17: key[CODES][ui.select[ui.layer - 3] - 1] = 'q'; eeprom_change = true; break; - case 18: key[CODES][ui.select[ui.layer - 3] - 1] = 'r'; eeprom_change = true; break; - case 19: key[CODES][ui.select[ui.layer - 3] - 1] = 's'; eeprom_change = true; break; - case 20: key[CODES][ui.select[ui.layer - 3] - 1] = 't'; eeprom_change = true; break; - case 21: key[CODES][ui.select[ui.layer - 3] - 1] = 'u'; eeprom_change = true; break; - case 22: key[CODES][ui.select[ui.layer - 3] - 1] = 'v'; eeprom_change = true; break; - case 23: key[CODES][ui.select[ui.layer - 3] - 1] = 'w'; eeprom_change = true; break; - case 24: key[CODES][ui.select[ui.layer - 3] - 1] = 'x'; eeprom_change = true; break; - case 25: key[CODES][ui.select[ui.layer - 3] - 1] = 'y'; eeprom_change = true; break; - case 26: key[CODES][ui.select[ui.layer - 3] - 1] = 'z'; eeprom_change = true; break; - } - ui.index = M_CODE; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -void numb_proc() -{ - ui.num = sizeof(numb_menu) / sizeof(M_SELECT); - menu_ui_show(numb_menu); - list.box_x_trg = u8g2.getStrWidth(numb_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: key[CODES][ui.select[ui.layer - 3] - 1] = 0; eeprom_change = true; break; - case 2: key[CODES][ui.select[ui.layer - 3] - 1] = 1; eeprom_change = true; break; - case 3: key[CODES][ui.select[ui.layer - 3] - 1] = 2; eeprom_change = true; break; - case 4: key[CODES][ui.select[ui.layer - 3] - 1] = 3; eeprom_change = true; break; - case 5: key[CODES][ui.select[ui.layer - 3] - 1] = 4; eeprom_change = true; break; - case 6: key[CODES][ui.select[ui.layer - 3] - 1] = 5; eeprom_change = true; break; - case 7: key[CODES][ui.select[ui.layer - 3] - 1] = 6; eeprom_change = true; break; - case 8: key[CODES][ui.select[ui.layer - 3] - 1] = 7; eeprom_change = true; break; - case 9: key[CODES][ui.select[ui.layer - 3] - 1] = 8; eeprom_change = true; break; - case 10: key[CODES][ui.select[ui.layer - 3] - 1] = 9; eeprom_change = true; break; - } - ui.index = M_CODE; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -void func_proc() -{ - ui.num = sizeof(func_menu) / sizeof(M_SELECT); - menu_ui_show(func_menu); - list.box_x_trg = u8g2.getStrWidth(func_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F1; eeprom_change = true; break; - case 2: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F2; eeprom_change = true; break; - case 3: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F3; eeprom_change = true; break; - case 4: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F4; eeprom_change = true; break; - case 5: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F5; eeprom_change = true; break; - case 6: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F6; eeprom_change = true; break; - case 7: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F7; eeprom_change = true; break; - case 8: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F8; eeprom_change = true; break; - case 9: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F9; eeprom_change = true; break; - case 10: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F10; eeprom_change = true; break; - case 11: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F11; eeprom_change = true; break; - case 12: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_F12; eeprom_change = true; break; - } - ui.index = M_CODE; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -void more_proc() -{ - ui.num = sizeof(more_menu) / sizeof(M_SELECT); - menu_ui_show(more_menu); - list.box_x_trg = u8g2.getStrWidth(more_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_LEFT_CTRL; eeprom_change = true; break; - case 2: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RIGHT_CTRL; eeprom_change = true; break; - case 3: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_LEFT_SHIFT; eeprom_change = true; break; - case 4: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RIGHT_SHIFT; eeprom_change = true; break; - case 5: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_LEFT_ALT; eeprom_change = true; break; - case 6: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RIGHT_ALT; eeprom_change = true; break; - case 7: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_LEFT_GUI; eeprom_change = true; break; - case 8: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RIGHT_GUI; eeprom_change = true; break; - case 9: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_UP_ARROW; eeprom_change = true; break; - case 10: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_DOWN_ARROW; eeprom_change = true; break; - case 11: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_LEFT_ARROW; eeprom_change = true; break; - case 12: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RIGHT_ARROW; eeprom_change = true; break; - case 13: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_BACKSPACE; eeprom_change = true; break; - case 14: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_TAB; eeprom_change = true; break; - case 15: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_RETURN; eeprom_change = true; break; - case 16: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_ESC; eeprom_change = true; break; - case 17: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_INSERT; eeprom_change = true; break; - case 18: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_DELETE; eeprom_change = true; break; - case 19: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_PAGE_UP; eeprom_change = true; break; - case 21: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_PAGE_DOWN; eeprom_change = true; break; - case 22: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_HOME; eeprom_change = true; break; - case 23: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_END; eeprom_change = true; break; - case 24: key[CODES][ui.select[ui.layer - 3] - 1] = KEY_CAPS_LOCK; eeprom_change = true; break; - } - ui.index = M_CODE; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -void mode_proc() -{ - ui.num = sizeof(mode_menu) / sizeof(M_SELECT); - menu_ui_show(mode_menu); - list.box_x_trg = u8g2.getStrWidth(mode_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: key[MODES][ui.select[ui.layer - 2] - 1] = 1; eeprom_change = true; break; - case 2: key[MODES][ui.select[ui.layer - 2] - 1] = 2; eeprom_change = true; break; - case 3: key[MODES][ui.select[ui.layer - 2] - 1] = 0; eeprom_change = true; break; - } - if (ui.select[ui.layer - 2] == 11) for (uint8_t i = 0 ; i < KEYS ; ++i) key[MODES][i] = key[MODES][ui.select[ui.layer - 2] - 1]; - ui.index = M_EDIT; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -void measure_proc() -{ - ui.num = sizeof(measure_menu) / sizeof(M_SELECT); - menu_ui_show(measure_menu); - list.box_x_trg = u8g2.getStrWidth(measure_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 0: ui.index = M_MAIN; ui.state = S_DISAPPEAR; list_param_init_out(); main_param_init(); break; - case 1: - case 2: - case 3: - case 4: - case 5: - case 6: - case 7: - case 8: - case 9: - case 10: ui.index = M_VOLTAGE; ui.state = S_DISAPPEAR; list_param_init_in(); voltage_param_init(); break; - } - break; - } - } -} - -void settings_proc() -{ - ui.num = sizeof(settings_menu) / sizeof(M_SELECT); - menu_ui_show(settings_menu); - list.box_x_trg = u8g2.getStrWidth(settings_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 0: ui.index = M_MAIN; ui.state = S_DISAPPEAR; list_param_init_out(); main_param_init(); break; - case 1: ui.index = M_KNOB; ui.state = S_DISAPPEAR; list_param_init_in(); break; - case 2: ui.index = M_CONTROLLER; ui.state = S_NONE; controller.select = 0; break; - case 3: ui.index = M_CONTROLLER; ui.state = S_NONE; controller.select = 1; break; - case 4: ui.index = M_CONTROLLER; ui.state = S_NONE; controller.select = 2; break; - case 5: ui.index = M_CONTROLLER; ui.state = S_NONE; controller.select = 3; break; - case 6: ui.index = M_CONTROLLER; ui.state = S_NONE; controller.select = 4; break; - case 7: ui.index = M_SETTINGS; ui.state = S_DISAPPEAR; eeprom_change = true; controller.value[6] = !controller.value[6]; break; - case 8: ui.index = M_SETTINGS; ui.state = S_DISAPPEAR; eeprom_change = true; controller.value[7] = !controller.value[7]; break; - case 9: ui.index = M_SETTINGS; ui.state = S_DISAPPEAR; eeprom_change = true; controller.value[8] = !controller.value[8]; break; - case 10: ui.index = M_ABOUT; ui.state = S_DISAPPEAR; list_param_init_in(); about_param_init(); break; - } - break; - } - } -} - -void knob_proc() -{ - ui.num = sizeof(knob_menu) / sizeof(M_SELECT); - menu_ui_show(knob_menu); - list.box_x_trg = u8g2.getStrWidth(knob_menu[ui.select[ui.layer]].m_select) + 8; - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: case 1: rotate_switch(); break; - case 2: - switch (ui.select[ui.layer]) - { - case 1: controller.value[5] = 1; eeprom_change = true; break; - case 2: controller.value[5] = 2; eeprom_change = true; break; - case 3: controller.value[5] = 0; eeprom_change = true; break; - } - ui.index = M_SETTINGS; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -//正在编辑页面处理函数 -void controller_proc() -{ - uint8_t max_value; - uint8_t min_value; - uint8_t step_value; - switch (controller.select) - { - case 0: max_value = 255; min_value = 0; step_value = 5; break; - case 1: max_value = 90; min_value = 10; step_value = 1; break; - case 2: max_value = 90; min_value = 10; step_value = 1; break; - case 3: max_value = 90; min_value = 10; step_value = 1; break; - case 4: max_value = 50; min_value = 0; step_value = 5; break; - } - if (btn_pressed) - { - btn_pressed = false; - switch (btn_id) - { - case 0: if (controller.value[controller.select] < max_value) controller.value[controller.select] += step_value; eeprom_change = true; break; - case 1: if (controller.value[controller.select] > min_value) controller.value[controller.select] -= step_value; eeprom_change = true; break; - case 2: ui.index = M_SETTINGS; ui.state = S_NONE; break; - } - if (controller.select == 0) u8g2.setContrast(controller.value[0]); - } - menu_ui_show(settings_menu); - for (uint16_t i = 0; i < buf_len; ++i) buf_ptr[i] = buf_ptr[i] & (i % 2 == 0 ? 0x55 : 0xAA); - controller_show(); -} - -void voltage_proc() -{ - voltage_show(); - if (btn_pressed) - { - btn_pressed = false; - if (btn_id == 2) - { - ui.index = M_MEASURE; - ui.state = S_DISAPPEAR; - list_param_init_out(); - } - } -} - -void about_proc(void) -{ - about_show(); - if(btn_pressed) - { - btn_pressed = false; - switch(btn_id) - { - case 0: if (about.y_trg > 0) about.y_trg -= 12; break; - case 1: if (about.y_trg < 130 - display_height)about.y_trg += 12; break; - case 2: - ui.index = M_SETTINGS; - ui.state = S_DISAPPEAR; - list_param_init_out(); - break; - } - } -} - -//总的UI进程 -void ui_proc() -{ - switch (ui.state) - { - case S_NONE: u8g2.clearBuffer(); - switch (ui.index) - { - case M_SLEEP: sleep_proc(); break; - case M_MAIN: main_proc(); break; - case M_EDITOR: editor_proc(); break; - case M_EDIT: edit_proc(); break; - case M_EDITING: editing_proc(); break; - case M_CODE: code_proc(); break; - case M_ALPH: alph_proc(); break; - case M_NUMB: numb_proc(); break; - case M_FUNC: func_proc(); break; - case M_MORE: more_proc(); break; - case M_MODE: mode_proc(); break; - case M_MEASURE: measure_proc(); break; - case M_SETTINGS: settings_proc(); break; - case M_CONTROLLER: controller_proc(); break; - case M_KNOB: knob_proc(); break; - case M_VOLTAGE: voltage_proc(); break; - case M_ABOUT: about_proc(); break; - } - break; - case S_DISAPPEAR: disappear(); break; - } - u8g2.sendBuffer(); -} - -//OLED初始化函数 -void oled_init() -{ - u8g2.setBusClock(1000000); - u8g2.begin(); - u8g2.setFont(u8g2_font_helvB18_tf); - u8g2.setContrast(controller.value[0]); - buf_ptr = u8g2.getBufferPtr(); - buf_len = 8 * u8g2.getBufferTileHeight() * u8g2.getBufferTileWidth(); - display_width = u8g2.getDisplayWidth(); - display_height = u8g2.getDisplayHeight(); -} - -void setup() -{ - eeprom_init(); - oled_init(); - btn_init(); - hid_init(); - key_init(); -} - -void loop() -{ - btn_scan(); - ui_proc(); -} - -